Here is a photo that might help. Taken outside of Barcelona last year. Got
to the water no problem. You should be able to extrapolate the bed length.
The 2nd photo is how the Italian’s do It without a trailer. Not sure of the
pic order when it gets posted
Chris Geankoplis



IMG_3771.JPG

IMG_5103.JPG

On Tue, 25 Jun 2019 at 21:21, Chris Geankoplis <chrisgeankoplis at gmail.com>
wrote:

>
> On Tue, 25 Jun 2019 at 16:41, Peter Nyberg <peter at sunnybeeches.com> wrote:
>
>> Jesse,
>>
>>
>>
>> My trailer is a 2016 Triad dual axle.  All of the following measurements
>> are, of course, approximate.
>>
>>
>>
>> The distance from the trailer's hitch to the stern of the boat is about
>> 25’.
>>
>> My outboard extends about 2 1/2’ from the stern.
>>
>> If the rudder is pulled up, it sticks out a bit over 4’ from the stern,
>> but I wouldn’t think you would need to travel with it up.
>>
>>
>>
>> From the hitch to just behind the trailer’s rear tires is 18’.
>>
>>
>>
>> As for height, without the mast crutch, the highest thing on the boat is
>> the bow pulpit.  With the trailer jack as short as it can be made to go,
>> the highest point of my bow pulpit is 8 1/2’ from the ground.  Total height
>> would depend a bit on the orientation of the mast.
>>
>>
>>
>> If you need anything else, let me know.
>>
>>
>>
>> —Peter
>>
>>
>>
>>
>>
>> > On Jun 24, 2019, at 9:51 PM, Jesse Shumaker <
>> jesse.laten.shumaker at gmail.com> wrote:
>>
>> >
>>
>> > Any measurements you could provide would be helpful.  Thanks for
>> offering to
>>
>> > help!  It also would be good to know the max height of the boat on the
>>
>> > trailer as mentioned by Michael in another reply on this thread.  From
>> what
>>
>> > I have seen on other threads, the height can vary depending on whether
>> or
>>
>> > not the mast is on the crutch or not.
>>
>> >
>>
>> >
>>
>> >
>>
>> > --
>>
>> > Sent from: http://rhodes-22.1065344.n5.nabble.com/
>>
>>
>>
>>
>
>