Hey Mike,

Hopefully not a dumb question, but it looks like you have the relay coils
both going to the same contact on the motor.  Wouldn't they need to go to
opposite contacts to reverse the direction of the motor?

Hank

On Tue, Jun 18, 2019 at 6:04 PM Mike Riter <mike at traildesign.com> wrote:

> No worries Bob.
> I was just looking at my drawing and realized you don’t need a 30 amp rated
> switch since the switch is only powering the relay coils. I would recommend
> the best water tight, marine grade switch you can get that’s rated for a
> few amps higher than either of the relays.
>
> On Tue, Jun 18, 2019 at 4:07 PM Bob Garrant <bgarrant at gmail.com> wrote:
>
> > Mike,
> > The attachment came through. Very helpful. And just in time because the
> > remote seems like it’s about to ‘expire’.
> > Thanks very much,
> > Bob
> >
> >
> > On Tue, Jun 18, 2019 at 4:13 PM Mike Riter <mike at traildesign.com> wrote:
> >
> > > The switch needs to go through isolation relays to prevent back feeding
> > the
> > > system. The relays should already be there. You'll need to remove the
> > > wireless control and wire a SPDT switch rated for at least 30 amps in
> its
> > > place. I put together a drawing showing how it should be wired.
> > >
> > > Michael Riter
> > > President, Trail Design Specialists, Inc.
> > > Lead Instructor, Trail Master and mechanized training
> > > mike at traildesign.com
> > > 678-410-8021
> > >
> > >
> > >
> > > On Tue, Jun 18, 2019 at 2:10 PM Peter Nyberg <peter at sunnybeeches.com>
> > > wrote:
> > >
> > > > The attachment came through for me.  The link is at the very bottom
> of
> > > the
> > > > message.
> > > >
> > > > Peter Nyberg
> > > > Coventry, CT
> > > > s/v Silverheels (1988/2016)
> > > >
> > > >
> > > >
> > > > > On Jun 18, 2019, at 2:47 PM, Mark West via Rhodes22-list <
> > > > rhodes22-list at rhodes22.org> wrote:
> > > > >
> > > > > sorry the attachment did not go?
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: Mark West via Rhodes22-list <rhodes22-list at rhodes22.org>
> > > > > To: rhodes22-list <rhodes22-list at rhodes22.org>
> > > > > Sent: Tue, Jun 18, 2019 2:34 pm
> > > > > Subject: Re: [Rhodes22-list] Covert Badlands 2500 Winch from remote
> > to
> > > > rocker switch?
> > > > >
> > > > > I would remove the remote system, then rewire manual switch 1
> system
> > > > could back feed other and let the magic blue smoke out. mine needed
> 30
> > > amp
> > > > fuse I think this attachment is how I wire it  Mark s/v Fairwind 2
> > > > > -----Original Message-----
> > > > > From: Bgarrant <Bgarrant at gmail.com>
> > > > > To: rhodes22-list <rhodes22-list at rhodes22.org>
> > > > > Sent: Tue, Jun 18, 2019 10:20 am
> > > > > Subject: [Rhodes22-list] Covert Badlands 2500 Winch from remote to
> > > > rocker switch?
> > > > >
> > > > > I want to convert the Badlands 2500 Winch Motor for my motor lift
> > from
> > > a
> > > > > wireless remote to a rocker switch. I would appreciate guidance for
> > > doing
> > > > > this. It seems pretty straightforward but maybe I’m overlooking
> > > > something.
> > > > > Thanks,
> > > > > Bob Garrant
> > > > > s/v Sail la Vie 2000
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Sent from: http://rhodes-22.1065344.n5.nabble.com/
> > > > > -------------- next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: Untitled.png
> > > > > Type: image/png
> > > > > Size: 26970 bytes
> > > > > Desc: not available
> > > > > URL: <
> > > >
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20190618/b39bb15c/attachment.png
> > > > >
> > > > > -------------- next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: switch.png
> > > > > Type: image/png
> > > > > Size: 26970 bytes
> > > > > Desc: not available
> > > > > URL: <
> > > >
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20190618/984ca6e7/attachment.png
> > > > >
> > > >
> > > >
> > > -------------- next part --------------
> > > A non-text attachment was scrubbed...
> > > Name: SPDT reversible switch.jpg
> > > Type: image/jpeg
> > > Size: 599311 bytes
> > > Desc: not available
> > > URL: <
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20190618/f5cc30a3/attachment.jpg
> > > >
> > >
> >
> --
> Michael Riter
> President, Trail Design Specialists, Inc.
> Lead Instructor, Trail Master and mechanized training
> mike at traildesign.com
> 678-410-8021
>