Graham,
My stay was originally apx 27' 10 and 3/8 in. ItThe new one was
shortened to allow for the two extra fittings at top and bottom.
The attached photo shows the setup at the top of the mast. The photo is
upside down. The black disk in the photo is the top of the Alado furler.
The funky adjustable fitting was used to allow clearance for the extra
new fitting.
Hope this isn't too confusing. Call or text me if you need xtra info.
Gary
S/V Moon Shadow 1978 Rhodes 22 S/V Blackfish 1987 Corsair F27 Ankona Fl.
772-971-5753
20170627_094617.jpg
On 6/26/2017 12:50 PM, Graham Stewart wrote:
> Gary:
>> That is very helpful. Can you tell me what the additional fitting was? o you
> know what the length of the stay is?
> Thanks,
> Graham
>> -----Original Message-----
> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of
> Gary Novotny
> Sent: June 26, 2017 8:43 AM
> To: The Rhodes 22 Email List
> Subject: Re: [Rhodes22-list] forestay length and furling gear
>> Graham,
>> I have the Alado A0 on my Rhodes 22 and I'm happy with it. When I bought my
> Rhodes it came with a furler that was missing most of it's parts so I bought
> the Alado. It was very easy to install and has mostly worked well. The only
> significant problem I had occurred about 10 months ago when the forestay
> broke off right at the bottom swage fitting while sailing. At the time, the
> forestay was only 2 years old as I had replaced it at the same time as the
> furler. The forestay break was not catastrophic to the boat as I quickly
> used a halyard as a temporary stay and limped home.
>> I discussed this with a rigger (not the one who created that stay). He
> examined the stay and concluded that the problem was not improper swagging
> which was my conclusion but due to the rigging not allowing for the
> continuous port to starboard movement of the stay while underway. He
> suggested making the replacement stay slightly shorter and adding fittings
> that would allow for some side to side movement. I also made the new stay
> bigger in diameter.
>> I use my alado with a fairly large genoa which is bigger than a 160.
> This sail is too big actually, I'd prefer a 135, but this genoa came with
> the boat. To convert to the Alado, I had to have a sail maker modify the
> genoa to have the proper bolt tape for the alado foil.
>> The only furler issue I have had is really my own doing. I installed a
> furler line that is a little too large in diameter and sometimes when
> unfurling the line binds up in the hub, which requires pulling it in some
> and then re-releasing.
>>> Hope this helps.
>> Gary
>> S/V Moon Shadow 1978 Rhodes 22
> S/V Blackfish 1987 Corsair F27
>> Ankona Fl.
>>>> On 6/25/2017 8:54 PM, Graham Stewart wrote:
>> I have concluded that my old CDI furler is toast and am in the process
>> of deciding what to replace it with. I would like to hear any
>> suggestions for replacement members of the list might have. I am
>> currently inclined towards the Alado. Does anyone have experience with
> this system?
>> Also, I am trying to figure out what the length of the forestay should be.
>> My current forestay has a 5" extender below the turnbuckle. Is that
>> common on Rhodes or is my boat the exception? If I measure the
>> forestay and include the extender the total length is 27' 9 1/4". That
>> seems long to me as the specs for the boat stipulate 26.9'. Might my
>> rig have been set up with the mast raked back?
>>>> Does anyone know what proper length of the forestay? If it is actually
>> shorter than what I have I might need to lengthen the aft stays. I
>> plan to replace the forestay as mine has a number of nasty kinks in
>> it. Meanwhile I really don't know what length I should specify.
>>>> Help with this would be appreciated.
>>>> Graham
>>>> Graham Stewart
>> Agile. R22, 1976
>> Kingston Ontario Canada
>>>>>>>>>> __________________________________________________
>> To subscribe/unsubscribe go to
>>http://www.rhodes22.org/mailman/listinfo/rhodes22-list>>>> For the list Charter and help with using the mailing list and archives
>> go to http://www.rhodes22.org/list>> __________________________________________________
>>> --
> Gary Novotny
> 7309 S Indian River Drive
> Fort Pierce Florida 34982
> 772-4660956 home
> 772-9715753 cell
>gjnovotny at comcast.net>> __________________________________________________
> To subscribe/unsubscribe go to
>http://www.rhodes22.org/mailman/listinfo/rhodes22-list>> For the list Charter and help with using the mailing list and archives go to
>http://www.rhodes22.org/list> __________________________________________________
>> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list>> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list> __________________________________________________
>
--
Gary Novotny
7309 S Indian River Drive
Fort Pierce Florida 34982
772-4660956 home
772-9715753 cell
gjnovotny at comcast.net
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.
