Can someone sent Barry the trailer drawings please?
I have hard copies in my file and thought I had E copies but can not dig them out now.
If nobody can help, I can get to them tomorrow.
LMK
Ric
Dadventure

Richard F. Stott, AIA, LEED AP
ric at stottarchitecture.com
O -631-283-1777
C- 516-965-3164

> On Feb 27, 2024, at 1:29 PM, BARRY RUEHLEN <ruehbl at msn.com> wrote:
> 
> We have made significant progress on the rebuild of our Rhodes22. In the next few days we should be able to launch her and find out if she floats. The question for the group pertains to bunk spacing on a boatlift that I'm having installed now. Typical boatlift bunks are straight, as there are only two support beams on a lift , and they are over 8' apart. I'm assuming that the bunks would want to be fairly close to the shoal keel, maybe around 18" or so inbetween. I would like to have them a bit wider, but I'm not sure about the bottom strength of a sailboat.  We will try to get away without the second set of support bunks higher up on the bow. I will attempt to attach a picture of a typical lift showing the straight bunks I will be dealing with.
> Barry Ruehlen
> Sv Perseverance 1987
> Saint James City, Fl
> 
> ________________________________
> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of Weiss, Robert L via Rhodes22-list <rhodes22-list at rhodes22.org>
> Sent: Tuesday, February 27, 2024 9:18 AM
> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> Subject: Re: [Rhodes22-list] Electric start outboard wiring
> 
> My electric start outboard was installed by Stan at the factory in 2014 and he just connected the outboard to a block in the lazarette with the winch.
> 
> Bob
> Beach Spring
> ________________________________
> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of Reuben Mezrich <reuben.mezrich at gmail.com>
> Sent: Tuesday, February 27, 2024 7:53 AM
> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> Subject: [Rhodes22-list] Electric start outboard wiring
> 
> [EXTERNAL EMAIL ALERT]: Verify sender before opening links or attachments.
> 
> For those with electric start outboards, did you make the electric
> connection at the winch or did you run wires back to the battery under the
> settee? If the latter, what gauge wire did you use?
> I'm installing a Tohatsu 8hp electric start outboard
> --Reuben
> Reuben Mezrich
> cell: 410-499-8922
> Pelican Cove in Sarasota and Back Bay, Boston
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: pro-GQK8JelF.jpeg
> Type: image/jpeg
> Size: 902730 bytes
> Desc: pro-GQK8JelF.jpeg
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20240227/c88a5e5b/attachment.jpeg>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: pro-LcIsHLDB.jpeg
> Type: image/jpeg
> Size: 908297 bytes
> Desc: pro-LcIsHLDB.jpeg
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20240227/c88a5e5b/attachment-0001.jpeg>