The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Joe Dempsey



Water in the Cabin

2023-12-19; 11:25:12 EST

Member Since

2022-05-14

Posts: 215

I went around the forward end of the CB stringer, and went up through the floor in the head and cut a hole through the bulkhead from below the galley sink.  As I recall, it was not difficult to feed it up through the floor in the head.  Here are a few more of photos that may give you a better idea. BTW, while everything was opened up, I scraped the bilge and painted with Interlux Bilge Cote. Be sure to use their primer first. I did the same in the Lazarette. The Rule pump is automatic so doesn't need a float switch. I recommend installing an on/off/auto switch, which I mounted on the panel of the forward battery compartment. JoeSent via the Samsung Galaxy S23 5G, an AT&T 5G smartphone

-1243247750_IMG_20190412_1135280_2281377.jpg

345371999_IMG_20190531_1646461_828321.jpg

448539122_IMG_20200310_1317387_1183379.jpg

-1929005200_IMG_20201003_1430453_2371907.jpg
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting