Joe,

These are definitely an off the shelf product. They should be available from Rigrite or Dwyer mast. The OD of the spreader end cap that fits into the spreader is 7/8th of an inch.

Todd T.




20211025_193721.jpg

On Mon, Oct 25, 2021, 5:51 PM Peter Nyberg <peter at sunnybeeches.com> wrote:

> Joe,
>
> It's pretty likely that the spreader came from Dwyer (dwyermast.com).
> Their 1" OD round tubing used for spreaders has a wall thickness of .065",
> so ID would a tiny bit less than 7/8".  Unfortunately, their online catalog
> has spreaders with tips, but not just the tips (that I could find).  You
> could try giving them a call...
>
> --Peter
>
> > On 2021-10-23, at 13:12:58 EDT, Joe Dempsey wrote:
> >
> > I've searched the Archives and was unable to find a discussion on the
> spreader
> > dimensions and parts. I believe they are 1" O.D. and therefore should be
> 7/8"
> > I.D. but am not sure. Can anyone verify. I need a spreader tip. Is this
> a
> > standard or do I have to go to Edenton? Rig-Rite has a selection of tips
> but
> > don't know they will fit the Rhodes spreader.
> >
> >
>
>