Perhaps it is a question of using screws to secure the pump. Don’t. A bit of PL 5200 will do the trick.
Chris Geankoplis
ENOSIS
Rhodes, Greece

On Tue, Oct 5, 2021 at 3:17 AM Graham Stewart <gstewart8 at cogeco.ca> wrote:

> Normally you would want the thru hull for a bilge pump as high up on the
> hull as possible with a loop in the discharge hose. My discharge is above
> the galley where the hull is about .25" thich as I recall. Maybe I don't
> understand what you are asking.
>
> Graham Stewart
> Agile, Rodes 22, 1976
> Kingston Ontario
>
>
>
>
>
>
> -----Original Message-----
> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf
> Of
> Joe Dempsey
> Sent: Monday, October 4, 2021 6:11 PM
> To: rhodes22-list at rhodes22.org
> Subject: [Rhodes22-list] Hull Thickness
>
> I'm looking to mount a small bilge pump in the lazarette of my Rhodes. I'm
> having difficulty finding articles in the new Archives. Too many pages to
> scroll through and click. I've found a couple of articles indicating the
> thickness 12" or more from the centerline. Can anyone tell me the thickness
> near the centerline (6" or less)?
>
>  Thanks!
>
>