I tried sending pic but too large.
The set up of the spare seems OK.  I used a crutch tip which I carved out a little bit to cover the pull pin to avoid damage to the tire which was probably overkill. I got a simple spare bracket from a local boat store which did the job for $15. After getting ready for vacation I’m really gonna need a vacation.
A week and a half ago we had a Derecho (SP?)or a microburst or something which was worse than any hurricane that we have been through here. Since the boat didn’t part the mooring  I figured that all was well. But when I got on board I found out that there was a foot of salt water over the floorboards. Rolling and pitching I guess. So for the  past week and a half we have been cleaning the boat and its contents. Also installing a new main sail. And extra biz work!
Anyway, we are going to place the rudder in a contractor bag in the forepeak along with the defeated inflatable.
Take that tounge weight!


--
Best regards,
Jeff
JeffSmithPhoto.Net
w <http://NJphoto.Net>ww.jeffsmithphoto.net
Cell: 732-236-1368
Atlantic Highlands, NJ