Peter does sell small V-cleats that work well with the tiller clutch-I had them on my last boat.  You attach them with screws into the coaming, but be very careful to match the hole size exactly to the screw size to avoid crushing the fiberglass .  There is very little stress on these.  The Tiller Clutch comes with precise instructions for how these cleats should be positioned relative to the tiller clutch position on the tiller for optimum control.

I currently have my tiller clutch lines attached to the rear pulpit.  It’s not ideal but it works.

Michael McKay
(630) 209-2054 (m)

Sent from my iPhone

> On Jul 21, 2021, at 11:48 AM, Steven Alm <stevenalm at gmail.com> wrote:
> 
> Hi Chris. Mine came with 12’ but it’s just a length of 3/16” Sta Set so you
> can modify as you wish. It also came with two mounting screws and that’s
> all you need. Pete Crawford is the guy who sells them and he’s very
> responsive to any questions.
> 
>> On Wed, Jul 21, 2021 at 10:14 AM Christopher Knell <cknell at vt.edu> wrote:
>> 
>> Steven,
>> 
>> Which version of the tiller clutch did you purchase, the one with the 12'
>> or 16' control line? Also, did you find that you needed any additional
>> hardware?
>> 
>> Thanks,
>> Chris
>>