It might take me a few days to dig them up. I’m super busy - moving office. 
But close by.
Ric 

Richard Stott, AIA, LEED AP 
www.stottarchitecture.com
Office	631-283-1777
Cell		516-965-3164 

> On Mar 27, 2021, at 9:18 AM, Jeffrey Camiel <forg3d at gmail.com> wrote:
> 
> definitely interested in see your drawings.
> 
>> On Mar 27, 2021, at 6:17 AM, Ric Stott <ric at stottarchitecture.com> wrote:
>> 
>> I’ve seen other Rhodes with the traveler attached to the stern rail. It’s a compelling idea. My GBI 29 that I purchased from Stan about 7 years ago does a fairly good job but I’m in and out of the boat from the stern ladder often and it’s always in the way. 
>> I designed and built a couple of Delrin connectors with fast pins so I can remove one or both ends of the traveler and swing it out of the way or remove it. I have a spare pair of bar ends and the drawing I made to create them if anyone is interested. My stern rail has a kink in it from a crash my father had 25 years ago. I also want to add a passage in the rail at the ladder which will make using the stern ladder much easier. The newer 1” stern rails with the curves for the helm chairs are a big improvement over the older 7/8 tube like mine. If I upgrade my stern rail I might consider attaching a Harken or equal traveler to it. Then it’s out of the way for the ladder and operation the outboard.  
>> Stan is  a genius and the boat is a blessing to own. I’m proud of my boat and the organization.
>> Sail on. 
>> Ric
>> Dadventure.  
>> 
>> Sent from my iPhone
>> 
>>> On Mar 27, 2021, at 6:31 AM, JeffSmith <jeffsmithphoto at gmail.com> wrote:
>>> 
>>> ?Roger,
>>> I was referring to the 3 athwartship jib lead positions. I have been using
>>> the adjustable block on the track for my lead. 
>>> 
>>> 
>>> 
>>> -----
>>> Jeff Smith
>>> 2009 R22 #101 RADIANT
>>> Atlantic Highlands Municpal Harbor
>>> Atlantic Highlands, NJ
>>> 
>>> --
>>> Sent from: http://rhodes-22.1065344.n5.nabble.com/
>