Rick:
I am interested in seeing your drawings. 

Graham Stewart
Agile, Rodes 22, 1976
Kingston Ontario

-----Original Message-----
From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Ric Stott
Sent: Saturday, March 27, 2021 7:18 AM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] [Rhodes22e-list] New Traveler Modifications

I’ve seen other Rhodes with the traveler attached to the stern rail. It’s a compelling idea. My GBI 29 that I purchased from Stan about 7 years ago does a fairly good job but I’m in and out of the boat from the stern ladder often and it’s always in the way. 
I designed and built a couple of Delrin connectors with fast pins so I can remove one or both ends of the traveler and swing it out of the way or remove it. I have a spare pair of bar ends and the drawing I made to create them if anyone is interested. My stern rail has a kink in it from a crash my father had 25 years ago. I also want to add a passage in the rail at the ladder which will make using the stern ladder much easier. The newer 1” stern rails with the curves for the helm chairs are a big improvement over the older 7/8 tube like mine. If I upgrade my stern rail I might consider attaching a Harken or equal traveler to it. Then it’s out of the way for the ladder and operation the outboard.  
Stan is  a genius and the boat is a blessing to own. I’m proud of my boat and the organization.
Sail on. 
Ric
Dadventure.  

Sent from my iPhone

> On Mar 27, 2021, at 6:31 AM, JeffSmith <jeffsmithphoto at gmail.com> wrote:
> 
> ?Roger,
> I was referring to the 3 athwartship jib lead positions. I have been using
> the adjustable block on the track for my lead. 
> 
> 
> 
> -----
> Jeff Smith
> 2009 R22 #101 RADIANT
> Atlantic Highlands Municpal Harbor
> Atlantic Highlands, NJ
> 
> --
> Sent from: http://rhodes-22.1065344.n5.nabble.com/