Ric, I would be interested in seeing your design that lets you swing the traveler out of the way of the stern boarding ladder.  Sounds like a good idea.

Frank
s/v Mary Bess
Lake Keowee, SC

> On Mar 27, 2021, at 7:17 AM, Ric Stott <ric at stottarchitecture.com> wrote:
> 
> I’ve seen other Rhodes with the traveler attached to the stern rail. It’s a compelling idea. My GBI 29 that I purchased from Stan about 7 years ago does a fairly good job but I’m in and out of the boat from the stern ladder often and it’s always in the way. 
> I designed and built a couple of Delrin connectors with fast pins so I can remove one or both ends of the traveler and swing it out of the way or remove it. I have a spare pair of bar ends and the drawing I made to create them if anyone is interested. My stern rail has a kink in it from a crash my father had 25 years ago. I also want to add a passage in the rail at the ladder which will make using the stern ladder much easier. The newer 1” stern rails with the curves for the helm chairs are a big improvement over the older 7/8 tube like mine. If I upgrade my stern rail I might consider attaching a Harken or equal traveler to it. Then it’s out of the way for the ladder and operation the outboard.  
> Stan is  a genius and the boat is a blessing to own. I’m proud of my boat and the organization.
> Sail on. 
> Ric
> Dadventure.  
> 
> Sent from my iPhone
> 
>> On Mar 27, 2021, at 6:31 AM, JeffSmith <jeffsmithphoto at gmail.com> wrote:
>> 
>> ?Roger,
>> I was referring to the 3 athwartship jib lead positions. I have been using
>> the adjustable block on the track for my lead. 
>> 
>> 
>> 
>> -----
>> Jeff Smith
>> 2009 R22 #101 RADIANT
>> Atlantic Highlands Municpal Harbor
>> Atlantic Highlands, NJ
>> 
>> --
>> Sent from: http://rhodes-22.1065344.n5.nabble.com/