Mike,
You don't show a pic of the sail exposure when the outhaul is all the way
out (sail in).  It seems to me like you need one more wrap (or two) of the
outhaul around the mainsail furling tube.  I always have my mast down so I
would just pull the furler to the bottom and add a wrap.  If your Mast is
up you might be able to fish around to add another wrap, not sure.
Patrick

On Tue, Mar 23, 2021 at 3:02 PM Mike McKay <mm.bizlist1 at gmail.com> wrote:

> I recent acquired Liber, a 2006 R22 recycled in 2018.  The 2018 mainsail
> failed at and near the Sunbrella seam due to UV exposure damage.  My
> sailmaker patched in a panel to replace the damaged section, but it is
> clear
> that sunlight will always hit the sail inside the mast and it will become
> weaker over time due to UV exposure.   A picture is attached.
>
> The prior owner told me to detach the clew from the outhaul car and wrap it
> around the mast when leaving the boat for a while (he got that suggestion
> from Tino at General Boats) but that would still leave a significant
> section
> of Dacron constantly exposed through the slot in the mast.
>
> Any suggestions for how to better protect the main from premature failure?
>
> Thanks,
>
> Mike McKay
> s/v Liber 2006/2018
> <http://rhodes-22.1065344.n5.nabble.com/file/t998/Sail_damage.jpg>
>
>
>
>
> --
> Sent from: http://rhodes-22.1065344.n5.nabble.com/
>