When I reworked boat and reset panel I ran mine in the new panel enclosure between the cabin wall and cockpit wall down to bilge, note wires leaving on right side

9d078d01-039a-4060-a38a-026c6cf0c1fb.jpg
> 
> ?Hi
> I'm trying to run a wire from the panel to the lazerette. I"ve managed to run a messenger line from the lazerette under the starboard seats and then into the cabin. Would you remember how to run the line from the cabin floor to the panel?
> Thanks in advance
> --Reuben
> <quote author='Rhodes 22 mailing list'>
> 
> Regarding panel wiring.  I wound up re-routing all wires between the cabin
> wall and cockpit wall and terminating  on a terminal block so that I could
> have ready access to panel. I left some pull wires down to bilge so I could
> run future wiring.  See attached photos. 
> 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: IMG_4141.jpg
> Type: image/jpeg
> Size: 23956 bytes
> Desc: not available
> URL:
> <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200621/ce41e2d8/attachment.jpg>
> -------------- next part --------------
> 
> 
> 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: IMG_4143.jpg
> Type: image/jpeg
> Size: 31606 bytes
> Desc: not available
> URL:
> <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200621/ce41e2d8/attachment-0001.jpg>
> 
> </quote>
> Quoted from: 
> http://rhodes-22.1065344.n5.nabble.com/Panel-wiring-tp57483.html
> 
> 

> _____________________________________
> Sent from http://rhodes-22.1065344.n5.nabble.com