Hopefully these photos with dimensions will post.  Let me know what other
info you need.





*Captain Mitch Mitchell*


* ACA Open Water Instructor Trainer ACA Level 2 SUP Instructor Trainer*
*http://coastalkayak.com* <http://coastalkayak.com>
*Mailto:Mitch at CoastalKayak.com* <Mitch at CoastalKayak.com>
* 302-539-7999*


motor_lift3.jpg

motor_lift1.jpg

Motor_lift2.jpg

On Tue, Nov 17, 2020 at 11:34 AM Ric Stott <ric at stottarchitecture.com>
wrote:

> HI Mitch
> Wow -that’s a whole different thing.
> It looks like hybrid between Carys and mine.
> It looks like 1/4 stock over the 1/8” u channel, or ???
> Can you define the assembly for me?
>
>
> Richard Stott, AIA, LEED AP
> www.stottarchitecture.com
> Office  631-283-1777
> Cell            516-965-3164
>
>
>
>
>
> > On Nov 17, 2020, at 10:04 AM, Mitch Mitchell <mitchpadl at gmail.com>
> wrote:
> >
> > Here is a photo of my 1990. Pretty sure it’s original. If it’s the same
> as yours I could get you dimension.
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: image0.jpeg
> > Type: image/jpeg
> > Size: 89341 bytes
> > Desc: not available
> > URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201117/b043f770/attachment.jpeg
> >
> > -------------- next part --------------
> >
> >
> > Mitch
> >
> >> On Nov 14, 2020, at 10:16 AM, Cary Tolbert <retiredtoby at gmail.com>
> wrote:
> >>
> >> ?I am asking for help with photos for an 86 Rhodes.  My boat was
> >> apparently hit
> >> in the marina and I have a damaged motor mount. I was able to salvage
> most
> >> of the damaged parts and replicate them from existing patterns of the
> old
> >> parts.
> >> However, the LOWER STOPS were missing. So at this point I have no idea
> what
> >> I need to do to replicate these parts. Photos will be very helpful.
> >> Measurement would also be greatly appreciated. I am guessing any boat
> from
> >> an 82 to an 89 may have a very similar set up.  Ric I am glad you can
> now
> >> send pictures with your computer. You mentioned that we have the same
> set
> >> up. What type of material did Stan use for the stops?  Stan said, he no
> >> longer makes this type of mount and cannot furnish parts. So I must
> rely on
> >> your help and my modest skills to be able to sail next season.
> >> It must have been a lot of force on the collision as I found three  1/4
> >> inch stainless steel bolts bent to 90 degrees and one bolt was sheared
> into
> >> two pieces.
> >>
> >> Thanks for your help,
> >> Cary Tolbert
> >> S/V Whisper "86
> >> Radford, VA
>
>