Thanks Ric. You mentioned, from your survey, that we had the same mount.
The pictures would be really great. If you could give me the
dimensions that would put me in business.

While I am at it, I have one more question for those on da List. Does
anyone have experience with silicone dielectric grease as lubricant on a
track. I am thinking of  the rails of the motor lift.
Cary
Whisper

On Sat, Nov 14, 2020 at 3:21 PM Ric Stott <ric at stottarchitecture.com> wrote:

> Cory
> The pics I see of the red boat has a motor mount a grade level up from
> mine.  My aluminum rails are attached directly to the hull. There is a
> Delrin (I think) strip that runs on the inside of the channel, bottom to
> top. I took some pics and will send them out on Monday if I can.
> Ric
> Dadventure
>
> Sent from my iPhone
>
> > On Nov 14, 2020, at 11:38 AM, Lee Kuhn <lvjkuhn at gmail.com> wrote:
> >
> > ?The minute I get off the waiting list at your marina I'll pull the
> trigger
> > on getting a recycled one from Stan.
> >
> >> On Sat, Nov 14, 2020, 11:31 AM Cary Tolbert <retiredtoby at gmail.com>
> wrote:
> >>
> >> Thanks Lee. Your boat looks like it was upgraded in its  life. That
> system
> >> is much newer and a better thought out system than the one on my 86.
> >> Rob's 90 something has something similar for his 9.9 hp with all
> electrical
> >> controls.
> >> Any luck on tracking down your Rhodes 22 to be?
> >> Cary
> >>
> >>> On Sat, Nov 14, 2020 at 11:18 AM Lee Kuhn <lvjkuhn at gmail.com> wrote:
> >>>
> >>> Gary,
> >>>
> >>> Don't know if any of the attached of my former 1986 AT EASE will help.
> >>> Might need to enlarge.  Seems like a variety of stops might work.  Good
> >>> luck!
> >>>
> >>> Lee
> >>> No Boat Yet
> >>> Claytor Lake, VA
> >>>
> >>> On Sat, Nov 14, 2020 at 10:16 AM Cary Tolbert <retiredtoby at gmail.com>
> >>> wrote:
> >>>
> >>>> I am asking for help with photos for an 86 Rhodes.  My boat was
> >>>> apparently hit
> >>>> in the marina and I have a damaged motor mount. I was able to salvage
> >>> most
> >>>> of the damaged parts and replicate them from existing patterns of the
> >> old
> >>>> parts.
> >>>> However, the LOWER STOPS were missing. So at this point I have no idea
> >>> what
> >>>> I need to do to replicate these parts. Photos will be very helpful.
> >>>> Measurement would also be greatly appreciated. I am guessing any boat
> >>> from
> >>>> an 82 to an 89 may have a very similar set up.  Ric I am glad you can
> >> now
> >>>> send pictures with your computer. You mentioned that we have the same
> >> set
> >>>> up. What type of material did Stan use for the stops?  Stan said, he
> no
> >>>> longer makes this type of mount and cannot furnish parts. So I must
> >> rely
> >>> on
> >>>> your help and my modest skills to be able to sail next season.
> >>>> It must have been a lot of force on the collision as I found three
> >> 1/4
> >>>> inch stainless steel bolts bent to 90 degrees and one bolt was sheared
> >>> into
> >>>> two pieces.
> >>>>
> >>>> Thanks for your help,
> >>>> Cary Tolbert
> >>>> S/V Whisper "86
> >>>> Radford, VA
> >>>>
> >>> -------------- next part --------------
> >>> A non-text attachment was scrubbed...
> >>> Name: Motor Lift Side.jpg
> >>> Type: image/jpeg
> >>> Size: 1770484 bytes
> >>> Desc: not available
> >>> URL: <
> >>>
> >>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment.jpg
> >>>>
> >>> -------------- next part --------------
> >>> A non-text attachment was scrubbed...
> >>> Name: Motor Lift Top.jpg
> >>> Type: image/jpeg
> >>> Size: 1804873 bytes
> >>> Desc: not available
> >>> URL: <
> >>>
> >>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment-0001.jpg
> >>>>
> >>> -------------- next part --------------
> >>> A non-text attachment was scrubbed...
> >>> Name: Motor Lift Side Top.jpg
> >>> Type: image/jpeg
> >>> Size: 1845462 bytes
> >>> Desc: not available
> >>> URL: <
> >>>
> >>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201114/c7f75d52/attachment-0002.jpg
> >>>>
> >>>
> >>
>