Hey Graham,
               One thought that came to me in my sleep. The Brass angle
bracket to receive the locking Pin was a mistake as is. Copper or any
copper alloys are not compatible with aluminum.   Best to use aluminum, or
SS .   Or cover the brass with a bit of clear 3/8 or 1/2 Inch hose.

Chris Geankoplis
Enosis

On Sun, 20 Sep 2020 at 22:11, Graham Stewart <gstewart8 at cogeco.ca> wrote:

> Chris:
> What a terrific way to present your project. The PDF is perfect for
> multiple photos as it doesn't require opening and closing the browser
> repeatedly. It never occurred to me to post a PDF. I am very inclined to do
> something similar with my anchor.
>
> Graham Stewart
> Agile, Rodes 22, 1976
> Kingston Ontario
>
> -----Original Message-----
> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf
> Of Chris Geankoplis
> Sent: Sunday, September 20, 2020 9:39 PM
> To: The Rhodes 22 Email List
> Subject: [Rhodes22-list] LAZ Anchor storage
>
> A little while ago a couple of people asked about how I stow my
> Fortress/Danforth anchor in the Laz.  This afternoon I built another
> mounting board for #3 and installed it taking some pictures along the way.
> Anyway, here is the "finished project". I only used what I had on hand,
> which wasn't a lot as I am staying with my sister-in-law and only had a few
> bits & pieces of stuff from my son's boat project and this one.   I've put
> everything in a PDF so it should go through.  Enjoy.
>
>
> Chris G
> Enosis
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Laz Anchor Mount for a.pdf
> Type: application/pdf
> Size: 587913 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200920/1ded8b43/attachment.pdf
> >
>
>