Cory 
That lift looks like mine.
It stops at the rub rail.
It looks like your aluminum channel was reinforced with Delrin and has a piece broken when you took the photo. 
My aluminum channel is bent and weak closer to the top so it needs to be replaced or reinforced.
I’m temporarily using a West Marine lift. 
I’m most curious about hoe the 20” shaft performs in the waves. Does you prop come out of the water in the waves? 
My 25” shaft  on that same GB mount had problems in waves over 2 feet. It will spin out of the water when the stern is up and bow down. 
Thank you all for you replies and photos - very helpful. 
Ric 
sv Dadventure 

Richard Stott, AIA, LEED AP 
www.stottarchitecture.com
Office	631-283-1777
Cell		516-965-3164 

> On Sep 11, 2020, at 9:32 AM, Cary Tolbert <retiredtoby at gmail.com> wrote:
> 
> Ric, I have a Yamaha 8hp. ,4cycle, 20" shaft, electric start and electric
> tilt. It weighs in at 117 pounds. The KingStarboard rails on the lift have
> been replaced with aluminium.
> I think the motor is a 2005 model . The boat is an 86. The lift is manual.
> Cary Tolbert
> Radford, VA
> 
> 
> On Fri, Sep 11, 2020 at 8:58 AM Jesse Shumaker <
> jesse.laten.shumaker at gmail.com> wrote:
> 
>> 2013 Tohatsu 9.8HP 20" Shaft on GB original electric.
>> 
>> Replaced the original winch with a Rugcel winch.  Details including photos
>> are at
>> 
>> http://rhodes-22.1065344.n5.nabble.com/Replacement-of-winch-for-motor-lift-td56157.html#a56176
>> 
>> Top view photo of the motor lowered and running:
>> http://rhodes-22.1065344.n5.nabble.com/file/t907/SLE01.jpg
>> 
>> I attached a few more photos of the motor in the raised position when it's
>> on the trailer, docked, and while sailing.
>> 
>> On Fri, Sep 11, 2020 at 7:46 AM Ric Stott <ric at stottarchitecture.com>
>> wrote:
>> 
>>> Dear Rhodes
>>> How long is your shaft?
>>> Don’t be offended - it’s nothing too personal.
>>> I’d like to survey Rhodes owners to learn the most common outboard:
>>> 1. HP
>>> 2. Shaft length-  20” or 25”
>>> 3. Motor mount type
>>> Ex. GB original/ manual
>>>        GB original electric
>>>        GB converted E to M or M to E
>>>         3rd party parallelogram type
>>>         Custom.
>>> Currently I have
>>> 1.  ‘99 - 8 hp 2 stroke Merc
>>> 2. 25”
>>> 3.  Temp. West marine 16” parallelogram type. Original ‘84 rail type with
>>> Delrin  sliders to be re-commissioned.
>>> 
>>> I can’t send pics because I’m a Mac user but would appreciate any
>>> associated photos with replies.
>>> I’ll report findings to da list.
>>> Ric
>>> Sv Dadventure
>>> Hampton Bays NY
>>> Sent from my iPhone
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: Motor02.JPG
>> Type: image/jpeg
>> Size: 97758 bytes
>> Desc: not available
>> URL: <
>> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200911/3cfef487/attachment.jpe
>>> 
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: Motor01.JPG
>> Type: image/jpeg
>> Size: 88902 bytes
>> Desc: not available
>> URL: <
>> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200911/3cfef487/attachment-0001.jpe
>>> 
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: Motor03.JPG
>> Type: image/jpeg
>> Size: 79180 bytes
>> Desc: not available
>> URL: <
>> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200911/3cfef487/attachment-0002.jpe
>>> 
>> 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: DSCN6323 (1).JPG
> Type: image/jpeg
> Size: 3525812 bytes
> Desc: not available
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200911/2837d724/attachment.jpe>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: DSCN6324 (1).JPG
> Type: image/jpeg
> Size: 3508545 bytes
> Desc: not available
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200911/2837d724/attachment-0001.jpe>