I bought Delrin stock from McMaster Carr and made them on my cheap table saw. 
Drilled holes with my battery drill. 
Each slide is one piece that slides in the track, it’s about 7 inches long and fits fairly tightly in the ‘U’ channel. 
Ric 

Richard Stott, AIA, LEED AP 
www.stottarchitecture.com
Office	631-283-1777
Cell		516-965-3164 

> On Sep 1, 2020, at 4:51 PM, Lowe, Rob <rlowe at vt.edu> wrote:
> 
> Slim,
> I had sent these photos to Cary, not the entire list.  These show my slides from my motor lift and the channel they ride in.  They look like they are made of Starboard?  I don't know if you can get these from Stan or not but I expect you could fabricate yourself if need be. - rob
> 
> 
> ________________________________
> From: Lowe, Rob
> Sent: Monday, August 31, 2020 11:31 AM
> To: Cary Tolbert <retiredtoby at gmail.com>
> Subject: RE: Motor lift
> 
> 
> Cary,
> 
> Here are a couple of pictures of the part that goes in the slide as well as the slide itself.  Looks like just pieces of Starboard that has been cut, shaped, and drilled.  I expect you would make something similar or maybe find a shop that could make you some new ones. – rob
> 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: IMG_20200830_134925263.jpg
> Type: image/jpeg
> Size: 2146146 bytes
> Desc: IMG_20200830_134925263.jpg
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200901/2726ecf6/attachment.jpg>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: IMG_20200830_134955551.jpg
> Type: image/jpeg
> Size: 2730613 bytes
> Desc: IMG_20200830_134955551.jpg
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200901/2726ecf6/attachment-0001.jpg>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: IMG_20200830_135025173.jpg
> Type: image/jpeg
> Size: 2133244 bytes
> Desc: IMG_20200830_135025173.jpg
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200901/2726ecf6/attachment-0002.jpg>