Thanks! The cosmetic condition of the bulkhead was not good when I got the boat, having been damaged by old leaks. So, I just glued some automotive carpeting on the cabin side (along with the visible inner hull surfaces). On the side that faces the head, I sanded it down and covered it with a couple of coats of white topside paint to have a surface that's bright and easily cleaned.

John

________________________________
From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of Graham Stewart <gstewart8 at cogeco.ca>
Sent: Tuesday, May 19, 2020 11:30 PM
To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Flooring

Nice: I like the look of the bulkhear. What is on it?

Graham Stewart
Agile, Rodes 22, 1976
Kingston Ontario


-----Original Message-----
From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of
Retro53
Sent: Saturday, May 16, 2020 9:49 AM
To: rhodes22-list at rhodes22.org
Subject: Re: [Rhodes22-list] Flooring

Hi. When I bought my 1980 Rhodes three years ago, the flooring was just
plywood (hopefully marine) covered with a small piece of vinyl in the head
area. Since the floor seemed to be sound but nasty-looking, I cleaned it up
and covered it with vinyl plank flooring strips from my local home
improvement store, and finished the edges with stained wood trim. So far,
it's all held up well. Here's a before and after view.
Good Luck,
John
<http://rhodes-22.1065344.n5.nabble.com/file/t944/016.jpg>
<http://rhodes-22.1065344.n5.nabble.com/file/t944/thumbnail_20180731_124100.
jpg>



--
Sent from: http://rhodes-22.1065344.n5.nabble.com/