Since I was doing a complete gut and rebuild I decided to glass the hull deck joint on the inside from the companionway to the bow. In addition I removed and replaced the sealant and installed a new rub rail. I have leaks that I am having trouble finding but not at the hull deck joint.

Graham Stewart
Agile 1976 Rhodes 22
Kingston Ontario

-----Original Message-----
From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of JP Dempsey
Sent: Tuesday, October 1, 2019 1:37 PM
To: rhodes22-list at rhodes22.org
Subject: Re: [Rhodes22-list] First sail on my Rhodes and leaks!

Before you convince yourself that its the deck joint, check your water tank.
Is a certified type sealed tank or a chintzy converted Rubbermaid storage
box with a snap on lid? If the latter, that's probably your problem if
you're sailing with a filled tank. That was my case. If you determine that
it's not the water tank (try sailing with a dry tank), then look at the deck
joint. You'll have to remove the rubrail. In my case, I had to replace the
rubrail anyway due to storm damage and it was just old and ugly! My boat has
a two piece rail by TACO Marine. (Semi Rigid Vinyl Rub Rail  Black
#V21-9678BKA 20’ section Flexible Vinyl Insert (White) #V12-4144WHA 70’
section). These are simple to install and available an most marine
suppliers.  Once you have removed the rubrail, there is easy access to the
deck joint. I used a Dremel tool with a carbide cutter like a mini circular
saw to help remove the old sealant and cut a groove. It won't remove all of
the old stuff, but i think enough and a fresh groove to take the new
sealant. Some other Rhodies out there may have a better solution. I don't
know if my joint was leaking, but I know I have a dry bilge now!  Hope this
helps. 

<http://rhodes-22.1065344.n5.nabble.com/file/t752/Insert_Installation_Tip3.jpg> 







-----
JP Dempsey
s/v Respite 
Rhodes 22 1989/2005
Deltaville,VA
--
Sent from: http://rhodes-22.1065344.n5.nabble.com/