Thanks Peter!

-----Original Message-----
From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of Peter Nyberg
Sent: Friday, September 9, 2022 3:34 PM
To: rhodes22-list at rhodes22.org
Subject: Re: [Rhodes22-list] Tacking angle

Mike,

Photo attached (I hope).  A few notes:

* The track is about 36" long.

* The track mounted cleat in the picture is for my anchor rode.

* I'm pretty sure the track is attached by flat head machine screws threaded into the fiberglass deck.  There are no nuts or backing plate.  (Let me know if you want me to try to verify this.)

* Stan is so confident of the mounting technique that only every other screw hole in the track is utilized.

* The track in the picture is mounted too close to the cabin side, preventing the block car from using the aft-most foot or so of the track.  (The port track is OK.)

* The picture makes my boat look much more dirty that it does to my eye.

--Peter


> On 2022-09-09, at 11:31:25 EDT, Michael McKay wrote:
>
> Hi Peter,
> 
> I believe that GB had an option for a second jib lead track mounted forward 
> which it sounds like you have.  Do you have a picture that shows the position of 
> this track? 
> 
> Thanks,
> 
> 
> Mike McKay
> s/v Liber (2006/2018)
> Allatoona Lake
> Acworth, GA
> 
> 
> 
>