I like Mike’s reply.

On Wed, Jun 1, 2022 at 17:31 <mm.bizlist1 at gmail.com> wrote:

> Thanks Brian--36" is too short.  My gasket on a 2006 R22 is 54.25" long.
> I haven't tried Ebay yet but that’s a good idea.
>
> Mike
>
> -----Original Message-----
> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of
> Brian Ferguson
> Sent: Wednesday, June 1, 2022 2:24 PM
> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> Subject: Re: [Rhodes22-list] Source For New Centerboard Cap Gasket
>
> I'm sure there's a more efficient option, but I went onto Ebay for mine and
> ordered a roll of 3/16" neoprene. The thickness was based on an old post by
> Stan on the webpage; I think Roger provided the durometer rating. 40A? Mine
> came from a boat guy in Fort Lauderdale. My leftovers got used on other
> odds and ends. I looked just now and a roll 12" x 36" was about $40 with
> free shipping. Get out a nice sharp blade and a sunny day. I have an older
> CB but was able to cut out the interior as needed to support the lift
> mechanism.
>
> On Wed, Jun 1, 2022 at 1:12 PM <mm.bizlist1 at gmail.com> wrote:
>
> > Currently none of the rubber sheeting on Amazon or McMaster-Carr are the
> > right size for the gasket.  Has anyone found another option?  Stan is
> > incommunicado recently.
> >
> > -----Original Message-----
> > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of
> > Mitch Mitchell
> > Sent: Friday, May 20, 2022 6:34 PM
> > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> > Subject: Re: [Rhodes22-list] Source For New Centerboard Cap Gasket
> >
> > Sorry, that’s not the one I used. If you look that up on Amazon they come
> > in a wide variety of sizes and thickness. I listed that so you could get
> > the brand name.
> >
> > Sent from my iPhone
> >
> > > On May 20, 2022, at 5:41 PM, Michael D. Weisner <mweisner at ebsmed.com>
> > wrote:
> > >
> > > This product is too thin and not wide enough.
> > >
> > > Mike
> > > s/v Wind Lass ('91)
> > > Nissequogue River, NY
> > > I’d rather be sailing :~)
> > >
> > > -----Original Message-----
> > > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of
> > Mitch Mitchell
> > > Sent: Friday, May 20, 2022 12:16 PM
> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> > > Subject: Re: [Rhodes22-list] Source For New Centerboard Cap Gasket
> > >
> > > You might try this out. It comes in different sizes and thicknesses. I
> > found it on Amazon.
> > >
> > > NABOWAN Solid Rubber Sheets,Strips,Rolls 1/8" (.125") Thick x 3" Wide x
> > 120" Long, Thin Neoprene Rubber, Perfect for DIY Gasket Material,
> Sealing,
> > Liner, Shield, Padding, Mat : Industrial & Scientific
> > >
> > > Sent from my iPhone
> > >
> > >> On May 20, 2022, at 11:11 AM, John Wiberg <jwiberg at wi.rr.com> wrote:
> > >>
> > >> Thanks Mark.  I’ll Give a try.  John
> > >>
> > >>>> On May 20, 2022, at 9:53 AM, Mark West via Rhodes22-list <
> > rhodes22-list at rhodes22.org> wrote:
> > >>>
> > >>> charles.gabriel at gmail.com helps Stan in parts.  Hope this helps Mark
> > >>>
> > >>
> > >
> >
> >
>
>